Docomo F-08A, Руководство пользователя

Страница: 185 / 462

183
Camera
❖
Switching ON/OFF of full auto focus
When full auto focus is set to "ON", auto focus is activated automatically for
shooting, and the shutter clicks after the object is focused. The focus confirmation
tone does not sound.
･
When face detection frame is displayed, the green frame is used to focus. When
face detection frame is not displayed, the center of the screen is focused.
･
Full auto focus ON/OFF cannot be switched when Scene mode/effect is "Auto" or
"Night scene", or when the Smile-finder is set.
1
On the still image shooting screen,
m84
❖
Activating auto focus manually
1
On the still image shooting screen,
n
When face detection frame is displayed, the green frame is used to focus. When
face detection frame is not displayed, the center of the screen is focused. When
focused, a confirmation tone sounds.
The next procedure
→ P181 Step 3 and the following steps in "Shooting still
images with Camera"
･
When face detection frame is not displayed, an orange focus frame appears.
It changes to "+" when focused.
Canceling :
n
◆ Setting Continuous/4 frames/Panorama shooting
Continuous (Auto)/Continuous (Manual) : The set number of images are shot.
Images are saved in created animation format when the saving destination is set
to FOMA terminal and saved as individual still images to microSD card.
4 frames (Auto)/4 frames (Manual) : 4 continuous images are shot and saved as 1
still image composed with four-frame.
Panorama : 2-8 still images continuously shot shifting the direction of the camera
little by little can be form 1 still image connecting the images. During the
shooting, approximately one fifth of the previously shot still image is
transparently displayed on the seam. Shoot the next image overlaying the
transparent part. To connect horizontally, shoot rightward continuously, and to
connect vertically, shoot downward continuously.
･
Still images can be shot at interval of approximately 0.4 seconds in Continuous
(Auto) or 4 frames (Auto). However, the interval of shooting may differ depending
on the shooting condition.
･
During Panorama shooting, the transparent part for the next shooting can be
checked with grid line displayed.
･
Available image sizes and number of images to be shot are as follows.
*
Can be set in Continuous shot photos of Image settings. However, even if a number larger than the
maximum is set, only up to the maximum can be shot.
1
On the still image shooting screen,
m6 e 1
-
6
･
While Panorama shooting stand-by, press
I
to switch direction to connect.
When an icon in the lower left of the guide area is , the image is
connected horizontally, and when it is , the image is connected
vertically.
✔
INFORMATION
･
When Scene mode/effect is "Monochrome sketch", "Colored sketch", "Skin tone
enhance", "Eye enhance-Lo/-Hi" or "Eye+Skin enhance-Lo/-Hi", Continuous, 4 frame or
Panorama cannot be set.
･
When Auto timer is set, Continuous (Manual) or 4 frames (Manual) cannot be set.
Image size
Continuous
(Auto)
Continuous
(Manual)
4 frames
(Auto)
4 frames
(Manual)
Panorama
QCIF (176
×
144) 2-9
*
ー ー
QVGA (240
×
320) 2-9
*
4 8
H/V-VGA (640
×
480, 480
×
640) 2-6
*
4 4
Stand-by (480
×
854) 2-6
*
4 3
Overlap the transparent parts