Docomo F-08A, Руководство пользователя

Страница: 151 / 462

149
Mail
2
"Direct input"
e
Enter a phone number (up to 20 one-byte numeric
characters)
･
For a destination using an overseas service provider except DOCOMO, you
can send SMS after entering 21 characters maximum including "+".
･
For a destination using an overseas service provider except DOCOMO, enter
"+" (Press
0
for 1 sec. or more), "country code" and "mobile phone
number of the destination" in this order or enter "010", "country code" and
"mobile phone number of the destination" in this order (Also enter "+" or
"010" when replying to SMS from an overseas sender). Omit "0", if any, at the
beginning of the mobile phone number.
Entering from mail logs : Select "Sent msg log" or "Received msg log"
e
Select
a log
Entering by searching phonebook : "View phonebook"
e
Search
phonebook
e
Select a phonebook entry to send mail
3
Select the message text field
e
Enter the message text
･
The number of characters that can be entered differs depending on Font type
in SMS settings.
Inserting Signature : Select the message text field
e m46
4
C
･
To save SMS without sending it, if pressing
m2
, it is saved in "Unsent"
folder and the confirmation screen for pasting Shortcut icon appears.
✔
INFORMATION
･
When sending is completed correctly, the SMS is saved in a folder of Outbox. When the
memory space is not enough or when exceeding the savable number, the unprotected
sent mails are overwritten chronologically.
･
Depending on the radio wave conditions, font type or the terminal of the other party,
characters may not be displayed correctly at the receiver side.
･
Line feeds in message text may be replaced with spaces depending on the other party's
terminal.
･
When Font type is Japanese, if you use one-byte katakana, the receiver may not be able
to display them correctly. If you use pictograms,
is replaced with , and each of
pictograms except is replaced with a space.
･
When Font type is English and symbols ( ｜＾ { } [ ]
〜
￥ ) are entered, the number of
characters that can be sent is reduced. Moreover, symbol ( ｀ ) can be entered and sent,
but it is replaced with a space on the receiver's terminal.
･
i-mode mail that failed to be sent is saved in "Unsent" folder.
･
If setting SMS report request to "Request" and send SMS, you receive SMS report that
notifies you that the other FOMA terminal received SMS. SMS report request is saved
in the folder of Inbox.
･
Even if Activate/Deactivate of caller ID notification is "Not notify", caller ID is sent to the
receiver when SMS is sent.
･
When the memory space of Unsent messages is not enough or when exceeding the
savable number, SMS cannot be created. Delete unnecessary i-mode mail and/or SMS
from the folder of Unsent messages.
･
When using 2in1, you cannot send SMS for Number B.
❖
Editing/Sending sent or saved SMS
Sent SMS and SMS saved before sending or failed to send can be edited or sent. →
P128
Receive SMS
When SMS is received
1
Receive SMS
blinks and "Receiving message..." appears.
Mail ring alert sounds, the light turns on or blinks, and the reception result
screen appears.
The received SMS is saved in a folder of Inbox.
･
While receiving SMS,
f
: Cancel receiving
May be received depending on the reception conditions.