Docomo F-08A, Руководство пользователя

Страница: 5 / 462

3
･ In this manual, operation by pressing keys is represented by graphic symbols. → P26 "Part names and functions"
･
The representations and meanings of operating procedures are as shown below.
･
In this manual, to select an item by placing the cursor with
udlr
(Multi-cursor key) and pressing
g
(Enter key) is referred to as "select". Regarding
an operation to enter characters in the entry field, the final step of pressing
g
[OK] is omitted.
･
This manual uses the default settings to describe operations. If the settings are changed, the displays or operations of FOMA terminal may differ from the
ones described in this manual. For the default settings, see Menu List. → P344
Representation example Meaning
m
(1 sec. or more) Press
m
for 1 second or more.
m
[Settings & NW services]
572 e 1
-
3
On the stand-by display,
m
, move the cursor to [Settings & NW services] and press
g
. Successively, press
572
, then press any of
1
-
3
.
64
Voice/Videophone Calls
Record message
Recording voice/video messages when you
cannot answer the call
When Record message is activated, a greeting message is played and the caller can
record message when you cannot answer the call.
･
You can record up to 4 voice and videophone calls in total, approximately 30
seconds for each call.
･
When using 2in1, messages of up to 4 incoming calls to Numbers A and B can be
recorded to Record message in total. Display differs depending on mode.
◆ Activating Record message
1
m
[Phonebook & Logs]
71 e 1
or
2
When "ON" is set, appears on the stand-by display.
■ When there is an incoming call with Record message active
1
A call is received
When the response time set in Greeting msg resp time elapses, the greeting
message is played according to setting of Set greeting message.
INFORMATION
･
Even during the greeting message or recording to Record message, a call can be
answered by pressing
n
. For a videophone call, press
I
to send your image, or
a
to send the substitute image. In this case, message before the call was answered is not
recorded.
･
Record message does not operate when FOMA terminal is out of service area or turned
OFF. Use Voice Mail service.
･
When 4 messages are recorded, appears on stand-by display and Record message
or quick message recorder does not operate Delete unnecessary recorded messages
2
The other party's message is recorded
･
A beep announces the other party at the start and the end. And when
approximately 25 seconds elapsed since the start, 2 short beeps are heard to
warn that the end is approaching.
3
When the recording is completed, the call is terminated
Responding with quick message recorder <Quick message
recorder>
Even when Record message is not active, you can activate it only once by pressing
S
for 1 second or more while receiving a call. This operation does not set Record
message to active.
Function name
This name is
listed in Index.
Outline and
supplementary
description of
the function
Detailed
description
and
convenient
information
about the
function
Typical
operating
procedure
* The page shown here represents an example. Images may differ from actual page in this manual.
Index related to thumb index
Supplementary
description of
the operation