INSTRUCTIONS FOR USE DA 270, DA 370, DA 280, DA 380
UM_EN_DA270_DA280_DA370_DA380_m2015_2019-04_ver1.9 34 / 67
Assign function to the left / right side button of the foot controller at instrument control
Pressing of left/right side icon of the button opens
„pop-up menu“ with the offer of functions. Select desired
function by pressing the appropriate button. Press „ESC“ button if you want to cancel. You can setup both:
LEFT/RIGHT side buttons of the foot controller. You can choose only those functions, which are available for
the current tool. The others are disabled.
Note
After the turbine has been returned to the holder, the light goes off. Always return the micromotor or turbine to the
holder only after the completion of activity (foot controller level/pedal in the basic position).
Used oil
Used oil is collected in a receptacle
– see the illustration below. If the oil exceeds the marked maximum value, the
receptacle should be turned in the direction of the arrow and emptied. The filter should be replaced if contaminated.
Retraction of procedural water
Upon the termination of use of dental instrument (after release of the foot controller lever / pedal),
dental unit software automatically performs blowing of instrument head (micromotor, turbine) using cooling air of the
instrument in a duration of 0.5 seconds.
Chipblower function
Cooling of instrument ON/OFF
Changing of the direction of motor rotation
Instrument illumination ON/OFF
Main light ON/OFF
Bell
Cup filling
Bowl flushing
No function chosen
Switching the program of the instrument
Switch color of the instrument light (white/blue) (applies to motors: DENSIM DX BLUE, DENSIM DX
PRO BLUE)
