INSTRUCTIONS FOR USE DA 270, DA 370, DA 280, DA 380
UM_EN_DA270_DA280_DA370_DA380_m2015_2019-04_ver1.9 18 / 67
8.1.2 Ways of changing parameters in individual screens
The unit enables the user to set individual parameters.
The parameters can be set using several ways.
1-Setting of the value of a parameter by means of + / -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Press the button with respective parameter. The buttons that enable to change the value are displayed in red. Change
the value of the parameter by means of the b/- .
The new value is saved temporarily (until the change of the program number) by repeated pressing of the button with the
parameter under setting or permanetly into the program by means of the button
.
2-Setting of the value of a parameter by means of the keyboard
Press the button
to see the keyboard
In the keyboard there is displayed the minimum and maximum permissible value for the parameter in question. If the
value is outside the range, this is indicated by means of
„
!!!
“ and the value will not be accepted when pressing „OK“. The
button with decimal point is displayed only if the parameter in question enables so. To return without changing the value,
press ESC.
The new value is saved temporarily (until the change of the program number) by repeated pressing of the button with the
parameter under setting or permanetly into the program by means of the button
. Button
„BS“ serves to delete the
last position.
!!!
0
5
.
BS
OK
ESC
6
7
8
9
0
1
2
3
4
MIN:100 MAX:40000
+
-
> 1000 > 5000 > 20000 > 40000
P1
1:1
NORM
ENDODONCIA
PROGRAM 1
AFt 3.0s
3.5 Ncm
33%
40 000
X1/min
12.AUG 12:12
DR.SMITH
TYPE
INSTRUMENT TYPE
NÁSTROJA
