INSTRUCTIONS FOR USE DA 270, DA 370, DA 280, DA 380
UM_EN_DA270_DA280_DA370_DA380_m2015_2019-04_ver1.9 40 / 67
Button to assign program for switching from foot controller
By pressing on appropriate program, the program is included
or excluded from programs switching via
foot controller side button.
If the foot controller function P# has been chosen, then by repeated pressing of this button, all the included
programs are being switched cyclically towards sequentially higher program number. After the included program achieves
highest position number, then it again gets position with lowest sequential number.
Button for editing the program name.
Press and hold the button for ca 2 seconds. Alphanumeric keyboard is displayed by means of which the text
can be edited. Maximum length of the text is 20 characters.
Button for the selection of transmission ratio of the handpiece.
Press the button to display a
„pop-up menu“ with transmission ratio options:
Press the respective button to select the desired transmission ratio or cancel the selection of transmission ratio by pressing
the button
„ESC“. If you want to save the new value of the transmission ratio permanently into the memory, first press the
button of saving into the memory
. The new condition of saving the data into the memory is indicated by change in
the colour of the icon
. To cancel the condition, press the button again.
Button for setting the motor torque.
Press the button to start the setting mode in which the buttons whose values can be changed are displayed
in red. Change the parameter value by means of the b/- .
The new value is saved temporarily (until the change of the program number) by pressing the button of the
parameter being set again or permanently into the program by means of the button
. The button is active only in the
mode ENDODONTIC.
Button to active / deactivate the peristaltic pump
Press the button to activate -
/ deactivate -
starting the peristaltic pump. If activated, the peristaltic
pump is started together with the instrument when the lever / pedal of the foot controller has been moved.
Button for setting the flowrate and forced starting of the peristaltic pump.
The button is divided into two parts and it is active only if the peristaltic pump has been activated. To set the
flowrate of the media through the pump, press the right part of the button -
40%
. The setting mode is
started, in which the buttons whose values can be changed are displayed in red. Change the parameters by
means of the b/. The new value is saved temporarily (until the change of the program number) by pressing the
button of the parameter being set again or permanently into the program by means of the button
.
The new value can be entered also directly via numerical keyboard after pressing the button
Pres the button in the
left part -
to start the forced running of the peristaltic pump with the lever / pedal of the foot controller moved without
the motor started. The condition remains until turned off by repeated pressing the button
. It is possible to control
forced run of peristaltic pump by side button of foot controller by assigning function Chipblower on this side button.
Button to turn the instrument light on / off.
Press the button to turn the instrument illumination on -
/ off -
.
Button to change the direction of the motor rotation.
Press the button to change the direction of the motor rotation -
.
The button is active only at the rest
position of the lever / pedal of the foot controller.
