Diplomat ADEPT DA 270 Скачать руководство пользователя страница 29

Страница: 29 / 67

INSTRUCTIONS FOR USE DA 270, DA 370, DA 280, DA 380

UM_EN_DA270_DA280_DA370_DA380_m2015_2019-04_ver1.9 29 / 67

8.1.3 Setting of the water amount

Depending on the version of the dental unit the following applies:

the amount of cooling water for all instruments, except for the syringe, can be adjusted by means of the needle valve

located on the bottom side of the control panel. When the valve has been turned fully clockwisem, the water supply stops.

If the dental unit is fitted with a proportional valve the amount of the cooling water can be adjusted from the touch panel

- except for the syringe.

8.1.4 Button of the brake of the control panel (according to the version)

By  pressing  the  button  the
control panel is unbraked and it
is  possible  to  move  it  freely  in
vertical  direction.  After  it  has
been set in the desired position
and  the  button  has  been
released, the control panel gets
braked.

Содержание ADEPT DA 270




































































Результаты поиска

Содержание ADEPT DA 270

Отзывы:

Похожие инструкции для ADEPT DA 270

Бренды по названию

Популярные бренды

Diplomat ADEPT DA 270, Инструкция по эксплуатации

Результаты поиска

Содержание ADEPT DA 270

Отзывы:

Похожие инструкции для ADEPT DA 270

Бренды по названию

Популярные бренды