INSTRUCTIONS FOR USE DA 270, DA 370, DA 280, DA 380
UM_EN_DA270_DA280_DA370_DA380_m2015_2019-04_ver1.9 39 / 67
8.1.9 Surgical micromotor
DX SRG
with peristaltic pump
After the instrument has been taken the data on its setting is displayed. Its meaning is as follows:
Instrument type
If the bargraph is inactive, it displays the type of the instrument being used.
Bargraph in active condition displays graphically an informative value of the main parameter (power output).
Buttons of the fast pre-selection of the motor rotations.
Press the respective button to change the setting of the output (rotations) to the said value. The data is not
saved automatically into the program memory.
Button for setting the motor rotations.
Press the button to start the setting mode in which the buttons whose values can be changed are displayed in
red. Change the parameter by means of the buttons +/- .
The new value is saved temporarily (until the change of the program number) by pressing the button of the
parameter being set again or permanently into the program by means of the button
. The new value can be entered
also directly via numerical keyboard after pressing the button
Button for the selection of a program.
Press the button to display a pop-up menu with program options.
Press the respective button to select the desired program or cancel selecting a program by means of the button ESC
To save all changed and unsaved parameters of instrument settings to program memory, just keep the button pressed for
a longer time (approximately 2 seconds)
The save is indicated by changed color of the icon (to red) and by sound signal (2 short beeps).
After the sound beeping, all data from temporal memory are written to permanent memory.
> 1000 > 5000 > 20000 > 40000
P1
PROGRAM 1
12.AUG 12:12
INSTRUMENT TYPE
DR.SMITH
UNIT
MODEL
40 000
X1/min
1:1
3.5 Ncm
40%
