INSTRUCTIONS FOR USE DA 270, DA 370, DA 280, DA 380
UM_EN_DA270_DA280_DA370_DA380_m2015_2019-04_ver1.9 22 / 67
USER
This option enables the user to set some parameters of the unit.
Editing the user menu
Press the button to see the screen to edit the user menu and it is possible to edit the text.
Only the text for the current user can be edited.
Setting the current time
Press the button to start the mode of setting the value. Move to hours /minutes (curent position displayed in red)
by means of the button
and set the desired time by means of the b / - . To save the said time into
the memory, press the button again.
Setting the current date
Press the button to start the mode of setting the value. Move to day /month / year (curent position displayed in
red) by means of the button
and set the desired date by means of the b / - . To save the said date
into the memory, press the button again.
Setting the timer
Press the button to start the mode of setting the value. Move to minutes / seconds (curent position displayed in
red) by means of the button
and set the desired time by means of the b / - . To save the said time
into the memory, press the button again. At selecting the time for the timer in the main screen this time is
marked with
„U“ symbol.
Setting the light intensity for higher illuminance
Press the button to start the mode of setting the value. Set the desired light intensity by means of the /
- . To save the data into the memory, press the button again.
The value is set within the range of lower intensity and maximum intensity, i.e.
0% = intensity of minimum illuminance set in the service menu, 100% = maximum illuminance set in the service menu.
Setting the light intensity for lower illuminance
Press the button to start the mode of setting the value. Set the desired light intensity by means of the
/ - . To save the data into the memory, press the button again.
The value is set within the range of zero and lower illuminance, i.e. 0 % = the light is off, 100% = minimum
illuminance set in the service menu.
Setting the temperature of water for the cup
Press the button to start the mode of setting the value. Set the desired water temperature using b / -
To save the data into the memory, press the button again.
The value can be set within the range of
35 ± 5 °C.
Setting the transmission ratio X:1
+
-
DR.SMITH
12:12
01:30
50%
100%
5.00:1
ESC
29-APR-2018
29°C
USER
50%
