Operating the DECserver 90L+
Table 3–2 (Cont.) DECserver 90L+ Information and Error Codes
Message
Number
Message
%DS90L–311
Illegal message
%DS90L–312
Protocol Error—Server Circuit Timer is Out of Range
%DS90L–313
Protocol Error—Number of Virtual Circuits Exceeded
%DS90L–314
Illegal Port Name
%DS90L–315
Port Name is Used by Another Port
%DS90L–316
Port In Use
%DS90L–317
Cannot Change Device Type While Printer is Busy
%DS90L–318
Invalid Character in Password
%DS90L–319
Password Not Verified
%DS90L–320
Cannot Perform Operation While Changing Authorized Mode
%DS90L–321
Connection Not Established—Network Not Connected
%DS90L–322
Disconnected—Network Not Connected
%DS90L–323
Protocol Error—Invalid Slot Received
%DS90L–324
Protocol Error—Invalid Service Class
%DS90L–326
No Such Service
%DS90L–327
Service is Not Offered by Requested Port
%DS90L–328
Port Name is Unknown
%DS90L–330
Password Length Exceeds 8 Characters
%DS90L–331
Invalid Port Speed
%DS90L–332
Illegal Server Name
%DS90L–333
Password Required
%DS90L–334
Cannot Use Default Port for Console
%DS90L–335
Cannot Put Subject Port into Test Mode
%DS90L–336
Maximum Circuits per Box Reached
%DS90L–337
Illegal Prompt
%DS90L–338
Console carrier protocol not available
%DS90L–339
Console carrier protocol already in use
%DS90L–340
Cannot Set Dedicated Service on Subject Port
(continued on next page)
3–12 Operating the DECserver 90L+