Overview
Figure 1–1 Sample DECserver 90L+ Connection
Terminal
Personal Computer
Printer
DECserver 90L+
Terminal Server
ThinWire
Ethernet
Computer 1
Computer 2
Computer 3
Computer N
Terminal
Terminal
Terminal
Terminal
Terminal
LJ-01099-TI0
Quick Start
To install and begin using your DECserver 90L+ is simple. It does not require
any programming or other assistance from system management. After unpacking
the unit:
1.
Plug the power supply in a working AC outlet and plug the power connector
from the power supply into your DECserver 90L+.
The green power LED turns on to indicate DC power is getting to the unit.
The green self-test LED turns on to indicate that the unit successfully
completed its internal self-test. The self-test takes approximately five seconds
to complete.
2.
Connect the unit to a properly terminated ThinWire Ethernet.
The green network LED turns on to indicate a good connection.
1–2 Overview