Operating the DECserver 90L+
DECserver 90L+ Information and Error Codes
The DECserver 90L+ interface provides you with an informational message or an
error message about any commands issued to the unit. Each message is made up
of a message number and the message. Table 3–2 lists each message number and
its message.
Table 3–2 DECserver 90L+ Information and Error Codes
Message
Number
Message
%DS90L–100
Parameters Have Been Changed
%DS90L–101
Parameters Have Not Been Changed
%DS90L–102
Authorized Mode Cleared
%DS90L–103
Power Down DS90L within 1 minute to Enable Authorized Mode
%DS90L–104
Power Down DS90L within 1 minute to Clear Authorized Mode
%DS90L–105
Manager Mode Enabled
%DS90L–106
Manager Mode Disabled
%DS90L–107
MOP session disconnected
%DS90L–107
<Service Name> session <session number> disconnected
%DS90L–108
<Service Name> session <session number> established
%DS90L–109
Password Changed
%DS90L–110
Port Has Been Reset
%DS90L–111
Server Has Been Reset
%DS90L–112
MOP session resumed
%DS90L–112
<Service Name> session <session number> resumed
%DS90L–113
Console connected (press Ctrl/D when finished)
%DS90L–114
Port Enabled
%DS90L–115
Port Disabled
%DS90L–116
Autobaud/Default Characteristics Enabled
%DS90L–117
Autobaud/Default Characteristics Disabled
%DS90L–118
Dedicated/Preferred Service Set
%DS90L–119
Dedicated/Preferred Service Cleared
%DS90L–120
On-Demand Loading Enabled
(continued on next page)
3–10 Operating the DECserver 90L+
