Managing the DECserver 90L+
The following example shows how to set port 8 for use with a printer (user entries
are bolded). The following port parameters are set in this example.
Port name: PRINT
Speed: 9600
Input flow: Remains unchanged
Output flow: Remains unchanged
Device type: Printer
Break: Remote
Remote modify: Remains unchanged
Test: Remains unchanged
-> SET 8,PRINT,9600,,,P,R,,
Return
-> %DS90L-100, Parameters Have Been Changed
->
Setting and Clearing Authorized Operation
The SET command is used to set and clear authorized operation. To set
authorized operation, you must have physical access to the unit because the
unit’s power must be cycled.
Setting the Authorized Operation by Menu
To set the authorized operation from the menu:
1.
Enter SET at the DECserver 90L+ prompt and press
Return
. The asterisk (*)
indicates the port to which you are connected.
2.
Select Authorized by entering AUTH and press
Return
.
3.
Select Set by entering S and press
Return
.
4.
Enter the new password. The password is not echoed.
5.
Enter the password again to verify. The verify password is not echoed.
Setting the Authorized Operation by Command Line
The command line for setting authorized mode operation is:
-> SET AUTH,S,<password>
Return
4–10 Managing the DECserver 90L+