Managing the DECserver 90L+
Clear Authorized Mode by Menu
Clearing authorized mode disables the security on the DECserver 90L+. To
clear authorized mode, your port must be in manager mode or you must have
physical access to the unit. Physical access to the unit is required when the unit’s
password is not known.
To clear authorized mode from the menu:
1.
Enter SET at the DECserver 90L+ prompt and press
Return
. The asterisk (*)
indicates the port to which you are connected.
2.
Select Authorized by entering AUTH and press
Return
.
3.
Select Clear by entering C and press
Return
.
4.
If the port you are connected to is not in manager mode, the unit’s power will
have to be cycled off and then on, within a one minute timeframe.
Clear Authorized Mode by Command Line
The command line for clearing authorized mode is:
-> SET AUTH,C
Return
4–12 Managing the DECserver 90L+
