Operating the DECserver 90L+
DECserver 90L+ Commands
The commands used to establish and control a terminal session and to manage
the DECserver 90L+ are described in Table 3–1. Chapter 4 provides a detailed
description of the SET and SHOW commands and how they are used to manage
the DECserver 90L+.
Table 3–1 DECserver 90L+ User Commands
Symbol/Command
Function
service
At the prompt (->), enter the name of the service
(maximum of 16 characters) with which you want
to establish a terminal session.
service [node [port]]
Establishes a terminal session with the service,
node (maximum of 16 characters), and port
(maximum of 8 characters) specified. The node
and port are optional.
C[ONNECT]
1
service [node [port]]
Establishes a terminal session with the service,
node, and port specified. The node and port are
optional. This command should be used to establish
a terminal session when a service name conflicts
with one of the DECserver 90L+ commands.
M[OP]
1
Ethernet address [verifica-
tion code]
Establishes a MOP session with the device owning
the specified Ethernet address. The Ethernet
address must be entered as 6 hex bytes, separated
by hyphens. The verification code is an optional
field. It may be used as a password by the device
you are trying to establish a MOP session with. If
used, the verification code must be entered as 8 hex
bytes, separated by hyphens.
Break
Interrupts a terminal session.
>
Resumes last interrupted session.
>
n
Resumes session specified by n.
n={1,2,3,4,M
2
}.
RESU[ME]
1
Resumes last interrupted session.
RESU[ME]
1
n
Resumes session specified by n. n={1,2,3,4,M
2
}.
F[ORWARD]
1
Cycles forward to the next session.
1
The characters in brackets [ ] are optional and do not need to be entered for the DECserver 90L+ to
recognize the command.
2
M represents a MOP session.
(continued on next page)
3–8 Operating the DECserver 90L+