Managing the DECserver 90L+
Command Line
The DECserver 90L+ user interface provides a command line interpreter as an
alternate means to set and show port and server parameters. The command
line interpreter helps with the control of the DECserver 90L+ by network
management software and by users who want to bypass the menu interface.
For command line entries, the commands and parameters are not entered
through a menu on the terminal screen. The user’s input is echoed and the
complete command is processed after a
Return
is entered. Note that any error in
parsing a command will cause the entire command to be ignored.
A space is required between the command (set or show) and its parameters. The
command line interpreter uses a comma (,) as a delimiter to separate the different
fields in a command line. To make the command line interpreter easier to use,
the current value (default) for a field will be used when:
1.
There is no entry for a field.
2.
A
Return
is entered before all the parameters have been entered.
The following are the command lines that can be entered at the DECserver 90L+
prompt (->) to set, show, or reset parameters.
Set Port Parameters:
->SET <port>,<name>,<speed>,<IFC>,<OFC>,<device>,<break>,<rem_mod>,<test>
-------------------------------------------------------------------
1
1200
E
E
T
L
E
Y
2
2400
D
D
P
R
D
N
3
4800
C
C
4
9600
5
19200
6
38400
7
8
Set Server Parameters:
-> SET S[erver],<name>,<actions>
--------------------------
N
Z
F
Managing the DECserver 90L+ 4–51
