DENT Instruments ELITEpro XC Скачать руководство пользователя

Страница: 31 / 138

1) Enter a descriptive name in the

Name

field to identify your logger (optional).

2) Choose which

Power Channel

(CT) will be used to generate pulses from the drop-down list.

NOTE

: The Power Channel drop-down list displays any enabled channel, allowing users to choose which

one(s) to use as a source for the pulses.

For example, if the setup table is only configured to measure one power channel, no other options will

be available in the Power Channel drop-down list. If the setup table is configured to measure two power

channels, you may choose either “1” or “2” from the drop-down list.

Users may wish to measure different pulse output variables on each channel. The Power Channels for

Digital 1 and Digital 2 may both be set to “1,” or set to “1” and “2” in order to measure the pulse outputs

of two Physical Power Channels, or both may be set to “2.” This enables users to measure pulse outputs

with different data in the

Value

and

Scale

described in the following sections.

3) Select a parameter (kWh, kVARh, or kVAh) to be used as the source for pulses from the

Value

drop-down list.

The

ELITE

pro

is capable of measuring the pulse output for KWh, KVAh, or KVARh. Only one may be

measured at a time if a single digital output channel is turned on, but users have the option of

measuring two different values concurrently from the same Power Channel if both Digital 1 and Digital 2

are in use.

4) Enter a scale in the

Scale

field to assign a significance to the pulses.

For example, if

is entered in the

Scale

field and

kWh

is selected for the

Value

, then each pulse

generated by the meter is equal to 22 kWh on the selected Power Channel.

NOTE:

The maximum output rate is five (5) pulses per second, or 5Hz, with a maximum current of 75mA

and 30V DC.

www.

.com

[email protected]

1.800.561.8187

Содержание ELITEpro XC











































































































































Результаты поиска

Содержание ELITEpro XC

Отзывы:

Похожие инструкции для ELITEpro XC

Бренды по названию

Популярные бренды

DENT Instruments ELITEpro XC, Руководство оператора

Результаты поиска

Содержание ELITEpro XC

Отзывы:

Похожие инструкции для ELITEpro XC

Бренды по названию

Популярные бренды