DENT Instruments ELITEpro XC Скачать руководство пользователя страница 10

Страница: 10 / 138

FCC COMPLIANCE

This device has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at user’s own expense.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause

undesired operation.

MAINTENANCE

There is no required maintenance with the

ELITE

pro

. Abide by the following items:

Cleaning:

No cleaning agents, including water, shall be used on the

ELITE

pro

Battery Life:

The lithium battery is only used to maintain the date and clock settings during power

failure and has a life expectancy of greater than 10 years. Contact DENT Instruments for service.

No accessories are approved for use with the

ELITE

pro

other than those specified in the DENT

Instruments product literature and price sheets.

If the logger appears damaged or defective, first disconnect all power and sensors. Call or email

technical support for assistance.

DENT Instruments

Bend, Oregon USA

Phone: 541.388.4774

DENTinstruments.com

Email:

[email protected]

www.

.com

[email protected]

1.800.561.8187

Содержание ELITEpro XC











































































































































Результаты поиска

Содержание ELITEpro XC

Отзывы:

DENT Instruments ELITEpro XC, Руководство оператора, Страница: 10 / 138

Результаты поиска

Содержание ELITEpro XC

Отзывы: