DENT Instruments ELITEpro XC Скачать руководство пользователя страница 30

Страница: 30 / 138

OWER

ONNECTION

The Power In/Out connection can be used with the

ELITE

pro

to measure loads where the line voltage

is less than 80 VAC and the internal power supply will not operate (a small battery bank, for example) or

where AC line voltages are not available and you want to use current transformers to record amps only.

It can also be used as a 6V output to power any outside devices.



To power the

ELITE

pro

using an external supply contact DENT Instruments for an

appropriately-rated power supply.



The

ELITE

pro

can also supply 6V DC at up to 200mA to an external device when the

ELITE

pro

voltage leads are connected to mains power between 80 and 600 VAC.

IGITAL

HANNEL

ONNECTIONS

Digital channel connections are part of legacy products produced before

ELITE

pro

, such as the

ELITE

pro

SP. Users of ELOG 15 connected to legacy products will see digital channels instead of analog

channels on the screen. The Digital channels provide users with a way to export kWh, kVAh, and kVARh

pulses to external devices. The ports are grounded when closed, and floating when open. For example, if

the setup table Digital 1 is configured to output KWh pulses with a Scale of 1.0, Digital channel 1 will

output a pulse for each kilowatt-hour of energy measured by the meter on Power Channel 1.

In Digital 2 the Scale is set to .001 (kWh), so a pulse would be generated for each Watt-hour of energy

measured on Power Channel 2.

See below.

For example, in the Digital Channels setup below:

A desk lamp with a 100W bulb will use 0.1 kWh every

hour; the meter produces a pulse once every 10 hours on Power Channel 1 and 100 pulses every hour

on Power Channel 2. In contrast, a 1,000W heater will use 1 kWh every hour; the meter produces a

single pulse once an hour on Power Channel 1 and 1,000 pulses every hour on Power Channel 2.

Digital 1/2: Turns the channels on/off by choosing an option from the drop-down list.

www.

.com

[email protected]

1.800.561.8187

Содержание ELITEpro XC











































































































































Результаты поиска

Содержание ELITEpro XC

Отзывы:

DENT Instruments ELITEpro XC, Руководство оператора, Страница: 30 / 138

Результаты поиска

Содержание ELITEpro XC

Отзывы: