DENT Instruments ELITEpro XC Скачать руководство пользователя страница 47

Страница: 47 / 138

The following options are available for configuring Physical Power Channels.

Physical Power Channel Options

Name

Name the channel so it describes the location or

item being monitored, such as "Water Heater"

or "Pump L1 Phase.” A maximum of 20

characters is allowed.

Optional

V High

High-side voltage. This is the “high” reference

voltage that will be measured with respect to

the reference “low” voltage, V Low.

Choices are: L1, L2, L3, Neutral.

V Low

Low-side voltage; reference for AC voltage.

Choices are: L1, L2, L3, Neutral.

PT Ratio

Potential Transformer turns ratio. This is used

when a step-down transformer is needed to

measure AC voltages greater than 600V. The

default is 1.000.

Type

This is the type of CT connected to the

ELITE

pro XC

Choices are: MilliVolt or R

Coil.

Amps

Depends on the type of CT selected. Displays

the value entered in the CT Size screen.

Phase Shift

Compensate for CT Phase Shift with this setting.

Default setting is 1.1 degrees.

Volts

Amps

KVA

KVAR

To record any or all of these values use the

menu to select an option.

Choices are: Average, Minimum, or

Maximum. In addition the integrated

hourly value in an option where

appropriate.

See

Power Measurement—Connecting CTs and Configuring Channels

for information on how to

properly configure the Setup Table for single-phase 2-wire, single-phase 3-wire, 3-phase 3-wire, and

3-phase 4-wire services.

www.

.com

[email protected]

1.800.561.8187

Содержание ELITEpro XC











































































































































Результаты поиска

Содержание ELITEpro XC

Отзывы:

DENT Instruments ELITEpro XC, Руководство оператора, Страница: 47 / 138

Результаты поиска

Содержание ELITEpro XC

Отзывы: