DENT Instruments ELITEpro XC Скачать руководство пользователя страница 8

Страница: 8 / 138

ELITE

pro

SAFETY SUMMARY AND SPECIFICATIONS

This general safety information is to be used by both

the Logger operator and servicing personnel. DENT

Instruments, Inc. assumes no liability for user’s

failure to comply with these safety guidelines.

4RH8

E186827

Conforms to UL Std 61010-1

Certified to CSA Std C22.2 No.

61010-1

The

ELITE

pro

is an Over-Voltage Category III device. Use approved rubber gloves with mechanical

protection and goggles when operating the device.

CAUTION: This LOGGER may contain life-threatening voltages. QUALIFIED PERSONNEL MUST disconnect all high

voltage wiring before using or servicing the LOGGER.

Warning:

Use of this device in a manner for which it is not intended may impair

its means of protection.

SYMBOLS ON EQUIPMENT

Denotes caution. See manual for a description of the meanings.

When connecting the

ELITE

pro

to an AC load, follow these steps in sequence

to prevent a shock hazard.

1. If possible, de-energize the circuit to be monitored.

2. Connect the CTs to the phases being monitored.

3. Connect the voltage leads to the different phases. Use proper safety

equipment (gloves, mask, and protective clothing) as required for the

voltages monitored.

Risk of electric shock. Life-threatening voltages may be present. Qualified

personnel only.

DO NOT EXCEED 600V Phase to Phase.

This logger is equipped to monitor loads

up to 600V. Exceeding this voltage will cause damage to the logger and danger to

the user. Always use a Potential Transformer (PT) for loads in excess of 600V. The

ELITE

pro

is a 600 volt Over-Voltage Category III device.

Dispose of properly.

www.

.com

[email protected]

1.800.561.8187

Содержание ELITEpro XC











































































































































Результаты поиска

Содержание ELITEpro XC

Отзывы:

DENT Instruments ELITEpro XC, Руководство оператора, Страница: 8 / 138

Результаты поиска

Содержание ELITEpro XC

Отзывы: