DeLUX MOISTURE Link G2 DP, Руководство по эксплуатации

Страница: 251 / 322

6

ORDERING INFORMATION
*Spark Igniter Sensing Period
MicroM Chassis Types (For use with MEP1XX, MEP2XX, and MEP5XX, includes dust cover)
MEC120 120 VAC input with standard plug-in board.
MEC120R 120 VAC input with remote reset capability.
MEC120D 120 VAC input with alpha-numeric display interface to ED510.
MEC120RD 120 VAC input with alpha-numeric display interface to ED510 and remote reset capability.
MEC120C 120 VAC input with interface to E500 Communication Interface and Modbus capability.
MEC120RC 120 VAC input with remote reset capability, alpha-numeric display interface to ED510, interface to E500 Communica-
tion Interface and Modbus capability.
MEC230 230 VAC input with standard plug-in board.
MEC230RC 230 VAC input with remote reset capability, alpha-numeric display interface to ED510, and Modbus capability.
MicroM Chassis Types (For use with MEP3XX, MEP4XX, and MEP6XX, includes dust cover)
MEC320 120 VAC input with standard plug-in board.
MEC320R 120 VAC input with remote reset capability.
MEC320D 120 VAC input with alpha-numeric display interface to ED510.
MEC320RD 120 VAC input with alpha-numeric display interface to ED510 and remote reset capability.
MEC320C 120 VAC input with interface to E500 Communication Interface and Modbus capability.
MEC320RC 120 VAC input with remote reset capability, alpha-numeric display interface to ED510, interface to E500 Communica-
tion Interface and Modbus capability.
MEC320TS 120 VAC input with display interface to ED510, Modbus interface and auxiliary relay output with dry contact for con-
troller interface (MED8).
MEC480 230 VAC input with standard plug-in board.
MEC480RC 230 VAC input with remote reset capability, alpha-numeric display interface to ED510, and Modbus capability.
MicroM Programmer Models (For use with MEC120 and MEC 230 Chassis)
MEP100 Relight operation, 10 sec. PTFI.
MEP101 Relight operation, allow flame signal until 60 seconds after interlock closed.
MEP102 Non-recycle on flame fail, 5 second PTFI.
MEP103 Fixed 10 second SISP*, 10 second MTFI, re-try once on igniter failure, fixed 30 second post purge.
MEP104 Non-recycle on flame fail, 10 second PTFI.
MEP105 Non-recycle on flame fail, lockout on air-flow open with flame present, 10 second PTFI.
MEP106 Same as MEP100. 12 second pre-purge, added reset from lockout via line voltage.
MEP107 Same as MEP100. Force 5 minute purge delay after main flame fail.
MEP108 Same as MEP100 with 0 second purge, 15 second PTFI, non-recycle on flame fail. Not FM approved.
MEP109 Immediate ignition and pilot, 10 second fixed PTFI, 10 second MTFI, intermittent pilot, non-recycle on flame fail.
MEP100P Relight operation, 10 sec PTFI, fixed 15 second post purge.
MEP130 Same as MEP100, 30 second PTFI. Not FM approved.
MEP230 Selectable purge timing (7, 30, 60, 90 sec.) 10 sec PTFI timing, recycle/non-recycle, post purge, prove air open at start.
MEP230H Same as MEP230 with 8 second pilot stabilization.
MEP235 Same as MEP230 with lockout on air flow open 10 seconds after the start of a cycle, selectable recycle/nonrecycle lockout
on air flow open after flame is proven and dedicated lockout after loss of flame.
MEP236 Same as MEP230 with additional 6 second igniter on time with main fuel. To be used with intermittent pilot only.
MEP237 Same as MEP230 with fixed PTFI timing and check/run switch. Used with MEDC2 amplifier to provide operation with 85
Series (Phoenix) and 95 Series (InSight) scanners.
MEP238 Same as MEP230. Ignition de-energized 3 seconds after pilot flame detected. Provides 8 second pilot stabilization period.
MEP290 Same as MEP230 except selectable post purge is 0 or 90 seconds.
MEP560 Same as MEP230H, 10 second main trial for ignition, run-check switch.
MEP561 Same as MEP560 without 8 second pilot stabilization. Selectable purge time of 7s, 10s, 15s, 30s.
MEP562 Same as MEP560, lockout on loss of air flow, non-recycle operation only.
MEP564 Same as MEP560. Selectable purge time of 7s, 30s, 60s, 240s.
MEP536 Same as MEP230, 10 second main trial for ignition, run-check switch, will not lockout on air flow open during purge.
MEP537 Same as MEP536 except provides one recycle on main flame failure.