DeLUX MOISTURE Link G2 DP, Руководство по эксплуатации

Страница: 57 / 322

GENERAL OPERATION
3 0
GENERAL OPERATOR MAINTENANCE
The design and manufacture of this dryer is directed toward operator safety.
Use extreme caution in working around high speed fans, gas fired burners, discharge augers,
and auxiliary augers, which may start without warning when the dryer is operating on
automatic controls.
Continued safe, dependable operation of automatic equipment depends to a great degree
upon the owner/operator. For a safe dependable drying system, follow the recommendations
within the manual and make it a practice to regularly inspect the operation of the unit for any
developing problems or unsafe conditions.
Keep a clean dryer
Do not allow fine material to accumulate on the plenum floor or a trash fire can result.
Checking the dryer at least every 24 hours and cleaning will help prevent problems.
The dryer should not be left unattended for extended periods of time.
Safety first!
Use only approved ladders and walkways to gain access to the dryer.
Disconnect and lockout all energy sources to the dryer before repair or maintenance is
performed.
Be sure all guards and shields are in place before operating the dryer.
Preparing dryer for operation
Check all safety controls for proper operation.
Check for worn or broken parts that need to be replaced.
Lubricate per instruction literature located in section 14.
Open air intakes doors.
Check belts for wear and tension.
Check chain tension and sprocket alignment.
55