DeLUX MOISTURE Link G2 DP, Руководство по эксплуатации

Страница: 183 / 322

Gas Electro-mechanical Valves
w w w . m a x o n c o r p . c o m
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2009 Copyright Maxon Corporation. All rights reserved.
10 - 30.1 - 29
E - m - 10/09
Description
MAXON electro-mechanical valves are electrically actuated fuel shut-off valves. The valves are designed for a fast acting return to
the at rest position upon removal of a control voltage signal. Motorized automatic and manual actuators are available depending
on application needs. In addition, normally-closed and normally-open options are available. The normally-closed versions will shut
off flow when de-energized and pass flow when energized. The normally-open versions will shut off flow when energized and pass
flow when de-energized. Electro-mechanical valves are also offered in configurations that meet hazardous locations.
Nameplate and abbreviations
Consult the nameplate of your valve. This lists the maximum operating pressure, temperature limitations, voltage requirements
and service conditions of your specific valve. Do not exceed nameplate ratings.
The installation, operation and maintenance instructions contain important information that must be read
and followed by anyone operating or servicing this product. Do not operate or service this equipment
unless the instructions have been read. IMPROPER INSTALLATION OR USE OF THIS PRODUCT COULD
RESULT IN BODILY INJURY OR DEATH.
Abbreviation or symbol Description
M.O.P. Maximum operating pressure
OPENING Valve opening time (for automatic valves only). Units shown in seconds.
Solenoid/clutch voltage and frequency
Motor voltage and frequency
T
AMB
Ambient temperature range
T
F
Fluid temperature range
SHUT Visual indication that valve is shut
OPEN Visual indication that valve is open
SPDT (HS) Single pole double throw hermetically-sealed switch(es)
SPDT Single pole double throw switch(es)
SPDT (HC)
Single pole double throw high capacity switch(es) (used when DC motors are
ordered)
DPDT Double pole double throw switch(es)
GENERAL PURPOSE AREA Designates components used in general purpose areas
DIVISION 2 AREA Designates components used in Division 2 hazardous locations areas
Valve is shut
Valve is partially open
Valve is full open
VOS-1/2 Valve open switch(es)
VCS-1/2 Valve closed switch(es); proof of closure
M
181