manualshive.com logo in svg

Dell Force10 MXL Blade, Справочное руководство, Страница: 99 / 732

Поделиться
Скачать
Dell Force10 MXL Blade Скачать руководство пользователя страница 99

Access Control Lists (ACL) |

99

Command

History

Usage

Information

The 

order

 option is relevant in the context of the Policy QoS feature only. For more information, refer 

to the 

Quality of Service (QoS)

 chapter of the 

FTOS Configuration Guide

. 

In the MXL Switch, you can configure either count (packets) or count (bytes). However, for an ACL 
with multiple rules, you can configure some ACLs with count (packets) and others as count (bytes) at 
any given time

.

Related

Commands

 

ip access-list standard

Create a standard IP access list (IP ACL) to filter based on IP address. 

Syntax

ip access-list standard 

access-list-name

 

Parameters

 

Defaults

All IP access lists contain an implicit 

deny any

, that is, if no match occurs, the packet is dropped.

Command Modes

CONFIGURATION

Command

History

Usage

Information

FTOS supports one ingress and one egress IP ACL per interface. 

The number of entries allowed per ACL is hardware-dependent. For detailed specification on entries 
allowed per ACL, refer to your switch documentation.

Example

Figure 6-4.  ip ac

cess-list standard Command Example

Related

Commands

 

permit

Configure a filter to permit packets from a specific source IP address to leave the switch. 

Syntax

permit

 {

source

 [

mask

] | 

any 

| 

host 

ip-address

} [

count

 [

byte

]] [

dscp

 

value

] [

order

]

To remove this filter, you have two choices: 

•

Use the 

no

 

seq

 

sequence-number

 command if you know the filter’s sequence number. 

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

ip access-list standard

Configures a standard ACL.

permit

Configures a permit filter.

access-list-name

Enter a string up to 140 characters long as the ACL name. 

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

FTOS(conf)#ip access-list standard TestList
FTOS(conf-std-nacl)#

ip access-list extended

Creates an extended access list.

resequence access-list

Displays the current configuration.

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов