manualshive.com logo in svg

Dell Force10 MXL Blade, Справочное руководство, Страница: 51 / 732

Поделиться
Скачать
Dell Force10 MXL Blade Скачать руководство пользователя страница 51

Control and Monitoring |

51

ip telnet source-interface 

Set an interface’s IP address as the source address in outgoing packets for Telnet sessions.

Syntax

ip

 

telnet

 

source-interface

 

interface

Parameters

Defaults

The IP address on the system that is closest to the Telnet address is used in the outgoing packets.

Command Modes

CONFIGURATION

Command

History

Related

Commands

ip tftp source-interface 

Assign an interface’s IP address in outgoing packets for TFTP traffic.

Syntax

ip tftp source-interface

 

interface

Parameters

Defaults

The IP address on the system that is closest to the Telnet address is used in the outgoing packets.

Command Modes

CONFIGURATION

Command

History

interface

Enter the following keywords and slot/port or number information:

•

For Loopback interfaces, enter the keyword 

loopback

 followed by a number from zero (0) 

to 16383.

•

For a Port Channel, enter the keyword 

port-channel

 followed by a number:

Range

: 1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 followed by 

the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the slot/port 

information. 

•

For VLAN interface, enter the keyword 

vlan

 followed by a number from 1 to 4094.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

telnet

Telnets to another device.

interface

Enter the following keywords and slot/port or number information:

•

For Loopback interfaces, enter the keyword 

loopback

 followed by a number from zero 

(0) to 16383.

•

For a Port Channel, enter the keyword 

port-channel

 followed by a number:1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 followed by 

the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the slot/

port information. 

•

For a VLAN interface, enter the keyword 

vlan

 followed by a number from 1 to 4094.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов