manualshive.com logo in svg

Dell Force10 MXL Blade, Справочное руководство, Страница: 156 / 732

Поделиться
Скачать
Dell Force10 MXL Blade Скачать руководство пользователя страница 156

156

|

Data Center Bridging

www.dell.com | support.dell.com

Defaults

none

Command Modes

POLICY-MAP-OUT-ETS

Command

History

Usage

Information

By default, equal bandwidth is assigned to each port queue and each dot1p priority in a priority group. 
Use the 

bandwidth-percentage

 command to configure bandwidth amounts in associated dot1p 

queues. When specified bandwidth is assigned to some port queues and not to others, the remaining 
bandwidth (100% minus assigned bandwidth amount) is equally distributed to unassigned non-strict 
priority queues in the priority group. The sum of the allocated bandwidth to all queues in a priority 
group should be 100% of the bandwidth on the link.

ETS-assigned bandwidth allocation applies only to data queues, not to control queues.

The configuration of bandwidth allocation and strict-queue scheduling is not supported at the same 
time for a priority group. If both are configured, the configured bandwidth allocation will be ignored 
for priority-group traffic when you apply the output policy on an interface. 

By default, equal bandwidth is assigned to each priority group in the ETS output policy applied to an 
egress port if no bandwidth allocation is configured. The sum of configured bandwidth allocation to 
dot1p priority traffic in all ETS priority groups must be 100%. You must allocate at least 1% of the 
total bandwidth to each priority group and queue. If bandwidth is assigned to some priority groups but 
not to others, the remaining bandwidth (100% minus assigned bandwidth amount) is equally 
distributed to non-strict-priority groups which have no configured scheduler.

Related

Commands

dcb-enable

Enable DCB.

Syntax

dcb enable

To disable DCB, use the 

no dcb enable

 command.

Defaults

none

Command Modes

CONFIGURATION

Command

History

Usage

Information

DCB is not supported if link-level flow control is enabled on one or more interfaces.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

qos-policy-output ets

Create a QoS output policy.

scheduler

Schedule priority traffic in port queues.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов