manualshive.com logo in svg

Dell Force10 MXL Blade, Справочное руководство, Страница: 352 / 732

Поделиться
Скачать
Dell Force10 MXL Blade Скачать руководство пользователя страница 352

352

|

Layer 2

www.dell.com | support.dell.com

Parameters

 

Defaults

All interfaces in Layer 2 mode are untagged.

Command Modes

INTERFACE VLAN

Command

History

Usage

Information

When you use the 

no tagged

 command, the interface is automatically placed in the default VLAN as 

an untagged interface unless the interface is a member of another VLAN. If the interface belongs to 
several VLANs, you must remove it from all VLANs to change it to an untagged interface.

Tagged interfaces can belong to multiple VLANs, while untagged interfaces can only belong to one 
VLAN at a time.

Related

Commands

 

track ip 

Track the Layer 3 operational state of a Layer 3 VLAN, using a subset of the VLAN member 
interfaces. 

Syntax

track ip

 

interface

To remove the tracking feature from the VLAN, use the 

no

 

track ip

 

interface

 command.

Parameters

Defaults

Not configured

Command Modes

INTERFACE VLAN

Command

History

interface

Enter the following keywords and slot/port or number information:

•

For a Port Channel interface, enter the keyword 

port-channel

 followed by a number:

Range: 1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 

followed by the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the 

slot/port information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

interface vlan

Configures a VLAN.

untagged

Specifies which interfaces in a VLAN are untagged.

interface

 

Enter the following keywords and slot/port or number information:

•

For a Port Channel interface, enter the keyword 

port-channel

 followed by a 

number:

Range: 1 to 128

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 

followed by the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the 

slot/port information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов