Dell Force10 MXL Blade Скачать руководство пользователя страница 404

Страница: 404 / 732

404

Open Shortest Path First (OSPFv2)

www.dell.com | support.dell.com

Command Modes

ROUTER OSPF

Command

History

Usage

Information

To enable OSPF on an interface, the

network area

command must include, in its range of addresses,

the primary IP address of an interface.

If you delete all the

network area

commands for Area 0, the

show ip ospf

command output will not list

Area 0.

passive-interface

Suppress both receiving and sending routing updates on an interface.

Syntax

passive-interface

{

default

interface

}

To enable both the receiving and sending routing, enter the

passive-interface

interface

command.

To return all OSPF interfaces (current and future) to active, enter the

passive-interface

default

command.

Parameters

Command Modes

ROUTER OSPF

Command

History

Usage

Information

Although the passive interface will neither send nor receive routing updates, the network on that

interface will still be included in OSPF updates sent via other interfaces.

mask

Enter a network mask in /prefix format. (/x)

area-id

Enter the OSPF area ID as either a decimal value or in a valid IP address.

Decimal value range: 0 to 65535

IP address format: dotted decimal format A.B.C.D.

Note:

If the area ID is smaller than 65535, it will be converted to a decimal value. For

example, if you use an area ID of 0.0.0.1, it will be converted to 1.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Note:

An interface can be attached only to a single OSPF area.

default

Enter the keyword

default

to make all OSPF interfaces (current and future) passive.

interface

Enter the following keywords and slot/port or number information:

•

For Port Channel groups, enter the keyword

port-channel

followed by a number:

Range: 1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

followed by the slot/port information.

•

For a VLAN, enter the keyword

vlan

followed by a number from 1 to 4094.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

followed by the

slot/port information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Force10 MXL Blade

Отзывы:

Похожие инструкции для Force10 MXL Blade

Бренды по названию

Популярные бренды

Dell Force10 MXL Blade, Справочное руководство

Результаты поиска

Содержание Force10 MXL Blade

Отзывы:

Похожие инструкции для Force10 MXL Blade

Бренды по названию

Популярные бренды