Dell Force10 MXL Blade Скачать руководство пользователя страница 501

Страница: 501 / 732

Routing Information Protocol (RIP) | 501

passive-interface

Suppress routing updates on a specified interface.

Syntax

passive-interface

interface

To delete a passive interface, use the

no passive-interface

interface

command.

Parameters

Defaults

Not configured.

Command Modes

ROUTER RIP

Command History

Usage Information

Although the passive interface neither sends nor receives routing updates, the network on that interface

is still included in RIP updates sent via other interfaces.

Commands

redistribute

Redistribute information from other routing instances.

Syntax

redistribute

{

connected

static

}

To disable redistribution, use the

no redistribute

{

connected

static

} command.

Parameters

Defaults

Not configured.

Command Modes

ROUTER RIP

Command

History

Usage

Information

To redistribute the default route (0.0.0.0/0), configure the

default-information originate

command.

interface

Enter the following information:

•

For a Port Channel interface, enter the keyword

port-channel

followed by a number:

Range: 1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

followed by the slot/port information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

followed by the

slot/port information.

•

For a VLAN, enter the keyword

vlan

followed by a number from 1 to 4094.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

neighbor

Enables RIP for a specified network.

network

Defines a neighbor.

connected

Enter the keyword

connected

to specify that information from active routes on interfaces

is redistributed.

static

Enter the keyword

static

to specify that information from static routes is redistributed.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Force10 MXL Blade

Отзывы:

Похожие инструкции для Force10 MXL Blade

Бренды по названию

Популярные бренды

Dell Force10 MXL Blade, Справочное руководство

Результаты поиска

Содержание Force10 MXL Blade

Отзывы:

Похожие инструкции для Force10 MXL Blade

Бренды по названию

Популярные бренды