Dell Force10 MXL Blade Скачать руководство пользователя страница 623

Страница: 623 / 732

Spanning Tree Protocol (STP) |

623

disable

Disable the spanning tree protocol globally on the switch.

Syntax

disable

To enable STP, use the

no disable

command.

Defaults

Enabled (that is, the spanning tree protocol is disabled.)

Command Modes

SPANNING TREE

Command

History

Related

Commands

forward-delay

The amount of time the interface waits in the Listening State and the Learning State before
transitioning to the Forwarding State.

Syntax

forward-delay

seconds

To return to the default setting, use the

no forward-delay command.

Parameters

Defaults

15 seconds

Command Modes

SPANNING TREE

Command

History

Related

Commands

hello-time

Set the time interval between generation of the spanning tree bridge protocol data units (BPDUs).

Syntax

hello-time

seconds

To return to the default value, use the

no hello-time

command.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

portfast bpdufilter default

Enters SPANNING TREE mode.

seconds

Enter the number of seconds the FTOS waits before transitioning STP to the
forwarding state.

Range: 4 to 30

Default: 15 seconds.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

max-age

Changes the wait time before STP refreshes protocol configuration information.

hello-time

Changes the time interval between BPDUs.

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Force10 MXL Blade

Отзывы:

Dell Force10 MXL Blade, Справочное руководство, Страница: 623 / 732

Результаты поиска

Содержание Force10 MXL Blade

Отзывы: