Dell Force10 MXL Blade Скачать руководство пользователя страница 219

Страница: 219 / 732

GARP VLAN Registration (GVRP) |

219

Related

Commands

debug gvrp

Enable debugging on GVRP.

Syntax

debug gvrp

{

config

events

pdu

}

To disable debugging, use the

no debug gvrp

{

config

events

pdu

} command.

Parameters

Defaults

Disabled

Command Modes

EXEC Privilege

Command

History

disable

Globally disable GVRP.

Syntax

disable

To re-enable GVRP, use the

no disable

command.

Defaults

Enabled

Command Modes

CONFIGURATION-GVRP

Command

History

Related

Commands

show gvrp statistics

Displays the GVRP statistics

config

Enter the keyword

config

to enable debugging on the GVRP configuration.

event

Enter the keyword

event

to enable debugging on the JOIN/LEAVE events.

pdu

Enter the keyword

pdu

followed one of the following Interface keywords and slot/port or

number information:

•

For a Port Channel interface, enter the keyword

port-channel

followed by a

number: Range: 1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

followed by the slot/port information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

followed by the

slot/port information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

gvrp enable

Enables GVRP on physical interfaces and LAGs.

protocol gvrp

Accesses the GVRP protocol.

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Force10 MXL Blade

Отзывы:

Dell Force10 MXL Blade, Справочное руководство, Страница: 219 / 732

Результаты поиска

Содержание Force10 MXL Blade

Отзывы: