Dell Force10 MXL Blade, Справочное руководство

Страница: 401 / 732

Open Shortest Path First (OSPFv2) | 401
ip ospf network
Set the network type for the interface.
Syntax ip ospf network { broadcast | point-to-point }
To return to the default, use the no ip ospf network command.
Parameters
Defaults Not configured.
Command Modes INTERFACE
Command
History
ip ospf priority
Set the priority of the interface to determine the Designated Router for the OSPF network.
Syntax ip ospf priority number
To return to the default setting, use the no ip ospf priority command.
Parameters
Defaults 1
Command Modes INTERFACE
Command
History
Usage
Information
Setting a priority of 0 makes the router ineligible for election as a Designated Router or Backup
Designated Router.
Use this command for interfaces connected to multi-access networks, not point-to-point networks.
ip ospf retransmit-interval
Set the retransmission time between lost link state advertisements (LSAs) for adjacencies belonging to
the interface.
Syntax ip ospf retransmit-interval
seconds
To return to the default values, use the
no ip ospf retransmit-interval
command.
broadcast
Enter the keyword
broadcast
to designate the interface as part of a broadcast
network.
point-to-point
Enter the keyword
point-to-point
to designate the interface as part of a
point-to-point network.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
number Enter a number as the priority.
Range: 0 to 255.
The default is 1.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module