Dell Force10 MXL Blade, Справочное руководство

Страница: 565 / 732

Security | 565
Usage
Information
This command displays the contents of the file flash:/ADMIN_DIR/ssh/authorized-keys. username.
Related
Commands
ssh
Open an SSH connection specifying the hostname, username, port number and version of the SSH
client.
FTOS supports both inbound and outbound SSH sessions using IPv4 addressing. Inbound SSH
supports accessing the system through the management interface as well as through a physical Layer 3
interface.
Syntax
ssh { hostname | ipv4 address } [ -l username | -p port-number | -v { 1 | 2 }]
Parameters
Defaults As above.
Command Modes EXEC Privilege
Command
History
Example Figure 29-13. ssh Command Example
ip ssh rsa-authentication (Config) Configures the RSA authorized keys.
hostname
(OPTIONAL) Enter the IP address or the hostname of the remote device.
ipv4 address (OPTIONAL) Enter the IP address in dotted decimal format A.B.C.D.
-l username
(OPTIONAL) Enter the keyword
-l
followed by the user name used in this SSH
session.
Default: The user name of the user associated with the terminal.
-p port-number
(OPTIONAL) Enter the keyword
-p
followed by the port number.
Range: 1 to 65536
Default: 22
-v
{
1
|
2
} (OPTIONAL) Enter the keyword
-v
followed by the SSH version 1 or 2.
Default: The version from the protocol negotiation
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#ssh 123.12.1.123 -l ashwani -p 5005 -v 2