Dell Force10 MXL Blade Скачать руководство пользователя страница 496

Страница: 496 / 732

496

Routing Information Protocol (RIP)

www.dell.com | support.dell.com

Commands

distribute-list out

Configure a filter for outgoing routing updates.

Syntax

distribute-list

prefix-list-name

out

[

interface

bgp

connected

ospf

static

]

To delete the filter, use the

no distribute-list

prefix-list-name

out

command.

Parameters

Defaults

Not configured.

Command Modes

ROUTER RIP

Command History

Commands

ip poison-reverse

Set the prefix of the RIP routing updates to the RIP infinity value.

Syntax

ip poison-reverse

To disable poison reverse, use the

no ip poison-reverse

command.

Defaults

Disabled.

Command Modes

INTERFACE

Command

History

ip prefix-list

Enters PREFIX-LIST mode and configures a prefix list.

prefix

list-name

Enter the name of a configured prefix list.

interface

(OPTIONAL) Identifies the interface type slot/port as one of the following:

•

For a Port Channel interface, enter the keyword

port-channel

followed by a

number:

Range: 1 to 128

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

followed by the slot/port information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

followed by

the slot/port information.

•

For a VLAN, enter the keyword

vlan

followed by a number from 1 to 4094.

connected

(OPTIONAL) Enter the keyword

connected

to filter only directly connected

routes.

ospf

(OPTIONAL) Enter the keyword

ospf

to filter all OSPF routes.

static

(OPTIONAL) Enter the keyword

static

to filter manually configured routes.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

ip prefix-list

Enters PREFIX-LIST mode and configures a prefix list.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Содержание Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Force10 MXL Blade

Отзывы:

Dell Force10 MXL Blade, Справочное руководство, Страница: 496 / 732

Результаты поиска

Содержание Force10 MXL Blade

Отзывы: