Dell C3760DN Color Laser Скачать руководство пользователя страница 217

Страница: 217 / 412

Understanding the Printer Menus

215

Secure Settings

Use the

Secure Settings

menu to set a password to limit access to the menus. This prevents items from being

changed accidentally.

NOTE:

Values marked by an asterisk (*) are the factory default menu settings.

See also:

"Panel Lock"

Panel Lock

Purpose:

To set a limited access to

Admin Settings

with a password, and to set or change the password.

Values:

Function Enabled

NOTE:

Function Enabled feature is available only when

Panel Lock Control

is set to

Enable

Purpose:

To specify whether to enable or disable each of the printer functions, or to require a password to use the functions.

Values:

Data Encryption

NOTE:

Data Encryption feature is available only when the optional hard disk is installed.

Purpose:

To disable or enable data encryption when using the printer.

Values:

Panel Lock Control

Disable

Disables password protection for

Admin Settings

Enable

Enables password protection for

Admin Settings

Change Password

0000

–

9999

Sets or changes the password required to access

Admin Settings

This item is available only when

Panel Lock Control

is set to

Enable

USB Direct Print

Enables the USB Direct Print function.

On (Password)

Enables the USB Direct Print function, but requires a password.

On (Color

Password)

Enables the USB Direct Print function with a color mode, but requires a

password.

Off

Disables the USB Direct Print function.

Change Password

Changes the password that is set under the

Function Enabled

menu.

This item is available only when

On (Password)

On (Color Password)

is enabled.

Encryption

Off

Disables encryption of the data.

Enables encryption of the data.

Encryption Key

Sets a key that is required for encryption.

Содержание C3760DN Color Laser





























































































































































































































































































































































































































Результаты поиска

Содержание C3760DN Color Laser

Отзывы:

Бренды по названию

Популярные бренды

Dell C3760DN Color Laser, Руководство пользователя

Результаты поиска

Содержание C3760DN Color Laser

Отзывы:

Бренды по названию

Популярные бренды