Dell C3760DN Color Laser Скачать руководство пользователя страница 211

Страница: 211 / 412

Understanding the Printer Menus

209

Auto Color To Mono Print

NOTE:

Auto Color To Mono Print feature is available when Dell ColorTrack is disabled.

Purpose:

To specify whether to print all print jobs in black and white even when color print is specified.

Values:

ColorTrack Error Report

Purpose:

To specify whether to automatically print error-related information if printing with ColorTrack results in an error.

Values:

Letterhead 2 Sided

NOTE:

Letterhead 2 Sided Mode feature is available only for Dell C3760dn Color Laser Printer.

Purpose:

To specify whether to print on both sides when using letterhead.

Values:

Low Toner Alert Msg

Purpose:

To specify whether to show the alert message when the toner is low.

Values:

S/W Download

Purpose:

To enable or disable download of firmware updates.

Values:

Off

Prints according to the specified color mode.

Prints all print jobs in black and white even when color print is specified.

Off

Does not print the error report when printing with ColorTrack results in an error.

Prints the error report when printing with ColorTrack results in an error.

Disable

Does not print on both sides of letterhead.

Enable

Prints on both sides of letterhead.

Off

Does not show the alert message when the toner is low.

Shows the alert message when the toner is low.

Disable

Disables firmware updates.

Enable

Enables firmware updates.

Содержание C3760DN Color Laser





























































































































































































































































































































































































































Результаты поиска

Содержание C3760DN Color Laser

Отзывы:

Бренды по названию

Популярные бренды

Dell C3760DN Color Laser, Руководство пользователя

Результаты поиска

Содержание C3760DN Color Laser

Отзывы:

Бренды по названию

Популярные бренды