DATREND Systems venTest, Руководство по эксплуатации

Страница: 5 / 117

To order this manual, use Part Number 6100-200
Revision
Revision History
Description Date
A Initial Release 2016-Mar-08
B General update 2018-Jun-28
Copyright
Datrend Systems Inc. (“DSI”) agrees to a limited copyright release that allows you to reproduce manuals and other
printed materials for use in service training programs and other technical publications. If you would like other
reproductions or distributions, submit a written request to Datrend Systems Inc.
Unpacking and Inspection
Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage
is found, stop unpacking the instrument. Notify the freight carrier and ask for an agent to be present while the instrument
is unpacked. There are no special unpacking instructions, but be careful not to damage the instrument when unpacking
it. Inspect the instrument for physical damage such as bent or broken parts, dents, or scratches.
Claims
Our routine method of shipment is via common carrier. Upon delivery, if physical damage is found, retain all packing
materials in their original condition and contact the carrier immediately to file a claim.
If the instrument is delivered in good physical condition but does not operate within specifications, or if there are any
other problems not caused by shipping damage, please contact your local sales representative or DSI immediately.
Standard Terms and Conditions
Refunds & Credits
Please note only serialized products (products labelled with a distinct serial number) and accessories are eligible for
partial refund and/or credit. Non-serialized parts and accessory items (cables, carrying cases, auxiliary modules, etc.)
are not eligible for return or refund. In order to receive a partial refund/credit, the product must not have been damaged,
and must be returned complete (meaning all manuals, cables, accessories, etc.) within 90 days of original purchase and
in “as new” and resalable condition. The
Return Procedure must be followed.
Return Procedure
Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number,
obtained from Datrend Customer Service. All items being returned must be sent
prepaid (freight, duty, brokerage, and
taxes ) to our factory location.
Restocking Charges
Products returned within 30 days of original purchase are subject to a minimum restocking fee of 15%. Products returned
in excess of 30 days after purchase, but prior to 90 days, are subject to a minimum restocking fee of 20%. Additional
charges for damage and/or missing parts and accessories will be applied to all returns. Products which are not in “as
new” and resalable condition, are not eligible for credit return and will be returned to the customer at their expense.
Certification
This instrument was thoroughly tested and inspected and found to meet DSI’s manufacturing specifications when it was
shipped from the factory. Calibration measurements are traceable to the National Research Council of Canada (NRC)
and/or the National Institute of Standards and Technology (NIST). Devices for which there are no NRC/NIST calibration
standards are measured against in-house performance standards using accepted test procedures.
Page i