DATREND Systems venTest Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 117

background image

Warranty Disclaimer

Should you elect to have your instrument serviced and/or calibrated by someone other than Datrend Systems or an
Authorized Service Centre, please be advised that the original warranty covering your product becomes void when the
tamper-resistant Quality Seal is removed or broken without proper factory authorization. We strongly recommend,
therefore, that you send your instrument to Datrend Systems or an Authorized Service Centre for service and calibration,
especially during the original warranty period.

In all cases, breaking the tamper-resistant Quality Seal should be avoided at all cost, as this seal is the key to your
original instrument warranty. In the event that the seal must be broken to gain internal access to the instrument (e.g.,
in the case of a customer-installed firmware upgrade), you must first contact Datrend Systems at 1-604-291-7747. You
will be required to provide us with the serial number for your instrument as well as a valid reason for breaking the Quality
Seal. You should break this seal only after you have received factory authorization. Do not break the Quality Seal before
you have contacted us! Following these steps will help ensure that you will retain the original warranty on your instrument
without interruption.

WARNING

Unauthorized user modifications or application beyond the published specifications may result in electrical shock hazards
or improper operation. Datrend Systems will not be responsible for any injuries sustained due to unauthorized equipment
modifications.

DSI DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR APPLICATION

.

THIS PRODUCT CONTAINS NO USER-SERVICEABLE COMPONENTS.
UNAUTHORIZED REMOVAL OF THE INSTRUMENT COVER SHALL VOID
THIS AND ALL OTHER EXPRESSED OR IMPLIED WARRANTIES.

Note: Calibration of Datrend products typically involves adjustment of parameters stored in firmware by proprietary
software. Parties other than Datrend and its Authorized Service Centers are limited to verification of the status of the
accuracy of the instrument. Do not confuse verification with calibration.

Page iii

«
...
5
6
7
8
9
...
»

Содержание venTest






















































































































Отзывы:

Нет отзывов

Похожие инструкции для venTest

Бренд: Baker Страницы: 82

Бренд: Eaton Страницы: 21

Бренд: NANO Страницы: 4

Бренд: Jacto Страницы: 12

Бренд: Raytheon Страницы: 68

Бренд: KegLand Страницы: 23

Бренд: Jumil Страницы: 78

Бренд: Kaiweets Страницы: 6

Бренд: Kaiweets Страницы: 6

Бренд: Cuisinart Страницы: 159

DJ Laptop stand +tray

Бренд: Power Dynamics Страницы: 3

Бренд: Jenx Страницы: 34

Бренд: B+S Страницы: 16

Бренд: PMK Страницы: 24

Бренд: SteelFlex Страницы: 13

Бренд: Stone Страницы: 36

Бренд: Scilogex Страницы: 21

Бренд: Lightolier Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды