DataCard ImageCard Magna, Руководство пользователя

Страница: 66 / 180

4-12
Maintaining the printer
User’s Guide for Magna™ Platinum Series™ Printers
Replace the supply cartridge if it was removed. See “Replacing the supply
cartridge” on page 2-10 for steps to follow.
6 Lower the supply tracker.
7 Close the cover.
If the printer has a locking cover, lock the cover after closing it.
8 Dispose of the used cleaning card.
♦
Cleaning the heated roller
At times, the heated roller in the optional overlay or topcoat module can have deposits
that affect card appearance. Clean the heated roller to remove deposits and improve
card appearance.
Clean the heated roller
1 Power off the printer. The heated roller in the overlay or topcoat module operates
at 400° F (200° C). Wait 30 minutes or until the heated roller area is cool.
The cleaning stick can withstand the operating temperature of the heated
roller. However, your hands will be close to the heated roller. Wait until the
heated roller is cool to avoid burning your hands.
If your printer has a locking cover, unlock the cover before opening it.
2 Lift the top cover.
3 Remove the supply cartridge to access the heated roller. See “Removing the
supply cartridge” on page 2-7 .
Use only the cleaning stick on the heater roller. Tools and sharp objects can
permanently scratch the heated roller and reduce card quality.
4 Use the cleaning stick to remove deposits from the heated roller.
a Push the cleaning stick back and forth on the heated roller (step 1 in
Figure 4-13 ).
The heated roller is above the card track, mounted in a pivoting frame.
b Use the cleaning stick to move the heated roller and make another area
available for cleaning (step 2 in
Figure 4-13 ).
c Repeat steps a and b to clean the entire area of the heated roller.
E
E
!
E
!
E