DataCard ImageCard Magna, Руководство пользователя

Страница: 25 / 180

Using the printer
2-7
User’s Guide for Magna™ Platinum Series™ Printers
6 Make sure print ribbon unwinds over the top of the print ribbon cartridge, not from
the bottom.
♦
Replace the print ribbon cartridge
1 Place the ribbon cartridge onto the ribbon cartridge supports (see Figure 2-9 ).
Make sure the cartridge is securely seated. Avoid touching the printhead cartridge
and ribbon tracker.
Figure 2-9: Replace the print ribbon cartridge
2 Close the swing arm, pressing it down until the push latch clicks into place.
3 Close the cover.
If the printer has a locking cover, lock the cover after closing it.
♦
Loading the overlay or topcoat material
If your printer includes an optional overlay or topcoat module, the module uses supply
material. For information about material, see
“Supplies and cards” on page B-1 .
This section describes the three steps of changing the supply material:
•
Remove the supply cartridge
•
Load material in the cartridge
•
Replace the supply cartridge
If you change the type of supply material you use, see the e-Guide for
ImageCard® Magna™ and UltraGrafix® Magna™ Printers for more information.
Removing the supply cartridge
Remove the supply cartridge when a "Supply empty" message appears, or when
setting up the printer.
2
1
i
E