Maintaining the printer
4-5
User’s Guide for Magna™ Platinum Series™ Printers
6
Slide a new replaceable cleaning sleeve onto the spindle (step 1 in
Figure 4-5
).
Figure 4-5: Replace the cleaning roller sleeve
7
Hold the replaceable cleaning roller spindle by the ends and remove the
protective cover from the sleeve (step 2 in
Figure 4-5
). Discard the protective
cover.
Avoid touching the sticky surface of the replaceable sleeve. Oils from your
fingers could reduce cleaning and could affect card quality.
8
Continue to hold the spindle by the ends. Replace the spindle with sleeve in the
printer (step 3 in
Figure 4-5
).
9
Replace the print ribbon cartridge.
10 Close the swing arm, pressing it down until the push latch clicks into place.
11 Close the printer top cover.
If the printer has a locking cover, lock the cover after closing it.
♦
Using the magnetic stripe cleaning card
The printer’s magnetic stripe module should be cleaned when the printer has
displayed several magnetic stripe errors that list running the magnetic stripe cleaning
card as a solution. See
“Supplies and cards” on page B-1
for information about
ordering magnetic stripe cleaning cards.
Do not use the magnetic stripe cleaning card more than once every 2000 cards or
excessive wear can result.
1
3
3
2
i
i
!
Содержание ImageCard Magna
