Danfoss VLT AutomationDrive FC 300 Series, Руководство по программированию, Страница: 118 / 211

13-10 Comparator Operand
Array [6]
Option: Function:
[13] Analog input
AI54 [13] Analog input AI54 Expressed as a
percentage.
[14] Analog input
AIFB10 [14] Analog input AIFB10 [V]. AIFB10 is
internal 10 V supply.
[15] Analog input
AIS24V [15] Analog input AIS24V [V] Analog
input AICCT [17] [°]. AIS24V is switch
mode power supply: SMPS 24V.
[17] Analog input
AICCT [17] Analog input AICCT [°]. AICCT is
control card temperature.
[18] Pulse input FI29 [18] Pulse input FI29 Expressed as a
percentage.
[19] Pulse input FI33 [19] Pulse input FI33 Expressed as a
percentage.
[20] Alarm number [20] Alarm number The error number.
[21] Warning number
[22] Analog input
x30 11
[23] Analog input
x30 12
[30] Counter A [30] Counter A Number of counts
[31] Counter B [31] Counter B Number of counts
[50] FALSE [50] False Enters the fixed value of false
in the comparator.
[51] TRUE [51] True Enters the fixed value of true
in the comparator.
[52] Control ready [52] Control ready The control board
receives supply voltage
[53] Drive ready [53] Drive ready The frequency converter
is ready for operation and applies a
supply signal on the control board.
[54] Running [54] Running The motor is running.
[55] Reversing [55] Reversing The output is high when
the frequency converter is running
counter clockwise (the logical product of
the status bits “running” AND “reverse”)
[56] In range [56] In range The motor is running
within the programmed current and
speed ranges set in
4-50 Warning
Current Low to 4-53 Warning Speed High .
[60] On reference [60] On reference The motor is running
on reference.
[61] Below reference,
low [61] Below reference, low The motor is
running below the value given in
4-54 Warning Reference Low
13-10 Comparator Operand
Array [6]
Option: Function:
[62] Above ref, high [62] Above reference, high The motor is
running above the value given in
4-55 Warning Reference High
[65] Torque limit [65] Torque limit The torque limit, set in
4-16 Torque Limit Motor Mode or
4-17 Torque Limit Generator Mode , has
been exceeded.
[66] Current limit [66] Current limit The motor current
limit, set in 4-18 Current Limit , has been
exceeded.
[67] Out of current
range [67] Out of current range The motor
current is outside the range set in
4-18 Current Limit .
[68] Below I low [68] Below I low The motor current is
lower than set in 4-50 Warning Current
Low .
[69] Above I high [69] Above I high The motor current is
higher than set in 4-51 Warning Current
High .
[70] Out of speed
range [70] Out of speed range The speed is
outside the range set in 4-52 Warning
Speed Low and 4-53 Warning Speed High .
[71] Below speed low [71] Below speed low The output speed
is lower than the setting in
4-52 Warning Speed Low .
[72] Above speed
high [72] Above speed high The output speed
is higher than the setting in
4-53 Warning Speed High .
[75] Out of feedb.
range [75] Out of feedb. Range The feedback is
outside the range set in 4-56 Warning
Feedback Low and 4-57 Warning
Feedback High .
[76] Below feedb.
low [76] Below feedb. Low The feedback is
below the limit set in 4-56 Warning
Feedback Low .
[77] Above feedb.
high [77] Above feedb. High The feedback is
above the limit set in 4-57 Warning
Feedback High .
[80] Thermal warning [80] Thermal warning The thermal
warning turns on when the temperature
exceeds the limit in the motor, the
frequency converter, the brake resistor
or thermistor.
[82] Mains out of
range [82] Mains out of range The mains
voltage is outside the specified voltage
range.
[85] Warning [85] Warning A warning is active.
[86] Alarm (trip) [86] Alarm (trip) A (trip) alarm is active.
Parameter Descriptions
VLT
®
AutomationDrive Programmming Guide
MG33ME02 - VLT
®
is a registered Danfoss trademark 117
3 3