![background image](http://html1.mh-extra.com/html/danfoss/fc322-series/fc322-series_instruction-manual_507962074.webp)
8.1.2 Q1 My Personal Menu
Parameters defined by the user can be stored in Q1 My Personal Menu.
Select
My Personal Menu
to display only the parameters, which have been pre-selected and programmed as personal parameters. For example, a pump
or equipment OEM may have pre-programmed these to be in My Personal Menu during factory commissioning to make on site commissioning / fine tuning
simpler.. These parameters are selected in par. 0-25
My Personal Menu
. Up to 20 different parameters can be defined in this menu.
Q1 My Personal Menu
20-21 Setpoint 1
20-93 PID Proportional Gain
20-94 PID Integral Time
8.1.3 Q2 Quick Setup
The parameters in Q2 Quick Setup are the basic parameters which are always needed to set-up the frequency converter to operation.
Q2 Quick Setup
Parameter number and name
Unit
0-01 Language
1-20 Motor Power
kW
1-22 Motor Voltage
V
1-23 Motor Frequency
Hz
1-24 Motor Current
A
1-25 Motor Nominal Speed
RPM
3-41 Ramp 1 Ramp Up Time
s
3-42 Ramp 1 Ramp Down Time
s
4-11 Motor Speed Low Limit
RPM
4-13 Motor Speed High Limit
RPM
1-29 Automatic Motor Adaptation (AMA)
8 How to Programme the Frequency Converter
Automation VT Drive FC322
Instruction Manual
74
MG.20.U1.22
8
Содержание FC322 Series
