[1833]
Analog Out X42/7 [V]
Shows the value of the signal applied to terminal X42/7 on the Analog I/O card.
[1834]
Analog Out X42/9 [V]
Shows the value of the signal applied to terminal X42/9 on the Analog I/O card.
[1835]
Analog Out X42/11 [V]
Shows the value of the signal applied to terminal X42/11 on the Analog I/O card.
[2117]
Ext. 1 Reference [Unit]
The value of the reference for extended Closed Loop Controller 1
[2118]
Ext. 1 Feedback [Unit]
The value of the feedback signal for extended Closed Loop Controller 1
[2119]
Ext. 1 Output [%]
The value of the output from extended Closed Loop Controller 1
[2137]
Ext. 2 Reference [Unit]
The value of the reference for extended Closed Loop Controller 2
[2138]
Ext. 2 Feedback [Unit]
The value of the feedback signal for extended Closed Loop Controller 2
[2139]
Ext. 2 Output [%]
The value of the output from extended Closed Loop Controller 2
[2157]
Ext. 3 Reference [Unit]
The value of the reference for extended Closed Loop Controller 3
[2158]
Ext. 3 Feedback [Unit]
The value of the feedback signal for extended Closed Loop Controller 3
[2159]
Ext. Output [%]
The value of the output from extended Closed Loop Controller 3
[2230]
No-Flow Power
The calculated No Flow Power for the actual operating speed
[2580]
Cascade Status
Status for the operation of the Cascade Controller
[2581]
Pump Status
Status for the operation of each individual pump controlled by the Cascade Controller
[2791]
Cascade Reference
Reference output for use with follower drives.
[2792]
% Of Total Capacity
Readout parameter to show the system operating point as a % capacity of total system capacity.
[2793]
Cascade Option Status
Readout parameter to show the status of the cascade system.
0-21 Display Line 1.2 Small
Option:
Function:
Select a variable for display in line 1, middle position.
[1662] *
Analog input 53
The options are the same as those listed for par. 0-20
Display Line 1.1 Small
.
0-22 Display Line 1.3 Small
Option:
Function:
Select a variable for display in line 1, right position.
[1614] *
Motor Current
The options are the same as those listed for par. 0-20
Display Line 1.1 Small
.
0-23 Display Line 2 Large
Option:
Function:
Select a variable for display in line 2.
[1615] *
Frequency
The options are the same as those listed for par. 0-20
Display Line 1.1 Small
0-24 Display Line 3 Large
Option:
Function:
[1652] *
Feedback [Unit]
The options are the same as those listed for par. 0-20
Display Line 1.1 Small
.
Select a variable for display in line 2.
8 How to Programme the Frequency Converter
Automation VT Drive FC322
Instruction Manual
82
MG.20.U1.22
8
Содержание FC322 Series
