![background image](http://html1.mh-extra.com/html/danfoss/fc322-series/fc322-series_instruction-manual_507962073.webp)
8 How to Programme the Frequency Converter
8.1 How to Programme
8.1.1 Parameter Set-up
Overview of parameter groups
Group
Title
Function
0-
Operation / Display
Parameters related to the fundamental functions of the frequency converter, function of
the LCP buttons and configuration of the LCP display.
1-
Load / Motor
Parameter group for motor settings.
2-
Brakes
Parameter group for setting brake features in the frequency converter.
3-
Reference / Ramps
Parameters for reference handling, definitions of limitations, and configuration of the re-
action of the frequency converter to changes.
4-
Limits / Warnings
Parameter group for configuring limits and warnings.
5-
Digital In/Out
Parameter group for configuring the digital inputs and outputs.
6-
Analog In/Out
Parameter group for configuration of the analog inputs and outputs.
8-
Communication and Options
Parameter group for configuring communications and options.
9-
Profibus
Parameter group for Profibus-specific parameters.
10-
DeviceNet Fieldbus
Parameter group for DeviceNet-specific parameters.
13-
Smart Logic
Parameter group for Smart Logic Control
14-
Special Functions
Parameter group for configuring special frequency converter functions.
15-
Drive Information
Parameter group containing frequency converter information such as operating data,
hardware configuration and software versions.
16-
Data Readouts
Parameter group for data read-outs, e.g. actual references, voltages, control, alarm,
warning and status words.
18-
Info and Readouts
This parameter group contains the last 10 Preventive Maintenance logs.
20-
Drive Closed Loop
This parameter group is used for configuring the closed loop PID Controller that controls
the output frequency of the unit.
21-
Extended Closed Loop
Parameters for configuring the three Extended Closed Loop PID Controllers.
22-
Application Functions
These parameters monitor water applications.
23-
Time-based Functions
These parameters are for actions needed to be performed on a daily or weekly basis, e.g.
different references for working hours/non-working hours.
25-
Basic Cascade Controller Functions
Parameters for configuring the Basic Cascade Controller for sequence control of multiple
pumps.
26-
Analog I/0 Option MCB 109
Parameters for configuring the Analog I/0 Option MCB 109.
27-
Extended Cascade Control
Parameters for configuring the Extended Cascade Control.
29-
Water Application Functions
Parameters for setting water specific functions.
31-
Bypass Option
Parameters for configuring the Bypass Option
Table 8.1: Parameter groups
Parameter descriptions and selections are displayed on the graphic (GLCP) or numeric (NLCP) in the display area. (See Section 5 for details.) Access the
parameters by pressing the [Quick Menu] or [Main Menu] key on the control panel. The quick menu is used primarily for commissioning the unit at start-
up by providing those parameters necessary to start operation. The main menu provides access to all parameters for detailed application programming.
All digital input/output and analog input/output terminals are multifunctional. All terminals have factory default functions suitable for the majority of water
applications but if other special functions are required, they must be programmed in parameter group 5 or 6.
Automation VT Drive FC322
Instruction Manual
8 How to Programme the Frequency Converter
MG.20.U1.22
73
8
Содержание FC322 Series
