Danfoss FC322 Series, Инструкция по эксплуатации

Страница: 91 / 186

8.2.5 4-** Limits and Warnings
Parameter group for configuring limits and warnings.
4-11 Motor Speed Low Limit [RPM]
Range: Function:
Application
dependent* [Application dependant] Enter the minimum limit for motor speed. The Motor Speed Low Limit can be set to correspond to
the manufacturer’s recommended minimum motor speed. The Motor Speed Low Limit must not
exceed the setting in par. 4-13
Motor Speed High Limit [RPM] .
4-13 Motor Speed High Limit [RPM]
Range: Function:
Application
dependent* [Application dependant] Enter the maximum limit for motor speed. The Motor Speed High Limit can be set to correspond to
the manufacturer’s maximum rated motor. The Motor Speed High Limit must exceed the setting in
par. 4-11
Motor Speed Low Limit [RPM]
. Only par. 4-11
Motor Speed Low Limit [RPM]
or
par. 4-12
Motor Speed Low Limit [Hz]
will be displayed depending on other parameters in the Main
Menu and depending on default settings dependant on global location.
NB!
Max. output frequency cannot exceed 10% of the inverter switching frequency (par. 14-01 Switching Frequency ).
NB!
Any changes in par. 4-13 Motor Speed High Limit [RPM] will reset the value in par. 4-53 Warning Speed High to the same value as set
in par. 4-13 Motor Speed High Limit [RPM] .
8.2.6 5-** Digital In/Out
Parameter group for configuring the digital input and output.
Automation VT Drive FC322
Instruction Manual 8 How to Programme the Frequency Converter
MG.20.U1.22
91
8