Danfoss FC322 Series, Инструкция по эксплуатации

Страница: 4 / 186

1.1.1 Copyright, Limitation of Liability and Revision Rights
This publication contains information proprietary to . By accepting and using this manual the user agrees that the information contained herein will be
used solely for operating equipment from or equipment from other vendors provided that such equipment is intended for communication with equipment
over a serial communication link. This publication is protected under the Copyright laws of Denmark and most other countries.
does not warrant that a software program produced according to the guidelines provided in this manual will function properly in every physical, hardware
or software environment.
Although has tested and reviewed the documentation within this manual, makes no warranty or representation, neither expressed nor implied, with
respect to this documentation, including its quality, performance, or fitness for a particular purpose.
In no event shall be liable for direct, indirect, special, incidental, or consequential damages arising out of the use, or the inability to use information
contained in this manual, even if advised of the possibility of such damages. In particular, is not responsible for any costs, including but not limited to
those incurred as a result of lost profits or revenue, loss or damage of equipment, loss of computer programs, loss of data, the costs to substitute these,
or any claims by third parties.
reserves the right to revise this publication at any time and to make changes to its contents without prior notice or any obligation to notify former or
present users of such revisions or changes.
1.1.2 Available Literature for Automation VT Drive FC322
- Automation VT Drive Instruction Manual MG.20.U1.22 provide the neccessary information for getting the drive up and running.
- Automation VT Drive High Power Instruction Manual MG.20.V1.22 provide the neccessary information for getting the HP drive up and running.
- Automation VT Drive Design Guide MG.20.X1.22 entails all technical information about the drive and customer design and applications.
- Automation VT Drive Programming Guide MN.20.W1.22 provides information on how to programme and includes complete parameter descrip-
tions.
technical literature is also available online at
www.danfoss.com/BusinessAreas/DrivesSolutions/Documentations/TeDocumentation.htm .
1 How to Read this Instruction Manual
Automation VT Drive FC322
Instruction Manual
4
MG.20.U1.22
1