![background image](http://html1.mh-extra.com/html/teac/dv-w28s-v/dv-w28s-v_product-information_826860001.webp)
PRINTED IN JAPAN Jul.’07 PDF . DS-287
Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.
TEAC CORPORATION
( http://www.teac.co.jp ) 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan Phone:81-42-356-9153 Fax:81-42-356-9184
TEAC AMERICA, INC.
( http://www.teac.com ) 7733 Telegraph Road, Montebello, California 90640, U.S.A. Phone:1-323-726-0303 Fax:1-323-727-7656
TEAC EUROPE GmbH.
( http://www.teac.de ) Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany Phone:49-611-71580 Fax:49-611-7158-392
TAIWAN TEAC CORPORATION
( http://www.teac.com.tw ) 3F No.45, Sec.1 Min Chuan E. Road, 104 Taipei, Taiwan R.O.C. Phone:886-2-2597-8608 Fax:886-2-2597-8591
TEAC ELECTRONICS ( M ) SDN BHD
( http://www.teac.com.my ) Lot 22, Batu Berendam Ftz
Ⅲ
, Batu Berendam, 75350 Melaka, Malaysia. Phone:60-6-2843402 Fax:60-6-2843471
© Copyright TEAC CORPORATION 2009
Data Storage Products Division
DVD Super Multi Drive
DV-W28S-V
■ Half inch height ( 12.7mm ) standard design
■ Buffer underrun Prevention
■ Supporting disc-at-once, session-at-once, packet write, incremental,
over write, track-at-once recording mode, sequential write, multi-session,
and back ground format
■ Horizontal and vertical mounting for most system configuration
is a trademark of DVD Format/Logo Licensing Corporation registered
in the U.S., Japan and other countries.
are trademarks of Koninklijke Philips Electronics N.V .
and
Write Speed
DVD+R
8x ( CAV )
( Max Speed )
DVD+R DL
6x ( ZCLV )
DVD-R
8x ( CAV )
DVD-R DL
6x ( ZCLV )
DVD+RW
8x ( ZCLV )
DVD-RW
6x ( ZCLV )
DVD-RAM
5x ( ZCLV )
CD-R
24x ( CAV )
CD-RW
US
24x ( ZCLV )
HS
10x ( CLV )
MS
4x ( CLV )
Read Speed
DVD-ROM
8x ( CAV )
( Max Speed )
DVD R
8x ( CAV )
DVD+R DL ( Finalized Disc ) 8x ( CAV )
DVD-R DL ( Finalized Disc ) 6x ( CAV )
DVD RW
8x ( CAV )
DVD-RAM ( 4.7G )
5x ( ZCLV )
CD-ROM
24x ( CAV )
CD-R/RW
24x ( CAV )
CD-DA ( DAE )
24x ( CAV )
Disc Diameter
12cm, 8cm
Interface
SerialATA Revision2.6
Serial ATA ( SATA )
Data Transfer Rate
Gen1i 1.5GB / sec
Access Time
150ms ( typ ) DVD-ROM
140ms ( typ ) CD-ROM
Data Buffer
2MB
Loading Mechanism
Drawer Type
Environmental Conditions
Ambient Temperatures Operating
5 to 45℃
Non Operating
-20 to 60℃
Transportation
-40 to 65℃
Ambient Humidity
Operating
8 to 80% ( non-condensing ) *
Non Operating
5 to 95% ( non-condensing ) *
Transportation
5 to 95% ( non-condensing ) *
Power Requirements
DC5V 5%
Current Consumption
Standby / Sleep 45mA / 32mA ( Average current max )
During starting / Seek 1500mA ( Max, Spikes less 1ms )
MTBF
60,000POH ( 10% duty )
Safty / EMI Standards UL, CUL, TÜV, CB, CE and BSMI
Dimensions
128.0W x 12.7H x 129.4D ( mm )
Mass ( Weight )
172g or less
RoHS
Complied
Remark
Please check the specification sheets for detailed conditions and other information.
* The maximum wet-bulb temp. is 29.4 degree C
8x DVD R
6x DVD R DL
8x DVD
+
RW
6x DVD
RW
8x DVD R
6x DVD R DL
8x DVD
+
RW
6x DVD
RW
13
(DRIVE BACK EDGE TO CONNECTOR BACK W
ALL)
(M2 T
AP CENTER)
(DRIVE BOT
TOM EDGE TO
CONNECTOR TONGUE TOP EDGE)
SATA CONNECTOR
DEPTH 2.5MAX. 1.4MIN.
30
48.8
±0.2
61.3
±0.2
3.8
±0.2
5.7
±0.2
6.8
27.3
±0.2
102.6
CLAMPING TORQUE:0.216N・m MAX(2.2kg・cm MAX)
RECOMMENDATION TORQUE:0.118N・m〜0.176N・m
(1.2kg・cm〜1.8kg・cm)
4-M2 TAPPED HOLES FOR INSTALLATION
REFER TO Fig.2
6.2
±0.38
SATA CONNECTOR
21.25
96.55
19.45
72.7
128.4±0.2
ACCESS INDICATOR
EJECT BUTTON
83.2
94.2
4.5
4.2 6.15
(102.8)
(25.6)
EMERGENCY HOLE(∅1.6)
13.2±0.2
4-R0.3
(DRIVE LEFT EDGE TO CONNECTOR CL.)
DV-W28S-V93
REFER TO Fig.2
REFER TO Fig.1
(LEFT SIDE
X
1,RIGHT SIDE
X
3)
DEPTH 2.0MAX. 1.4MIN.
4-M2 TAPPED HOLES FOR INSTALLATION.
(25.4)
128
(25.4)
3.3
2.4
0.7
(129.4)
12.7
9.9
+0.4
-0.25
3.3
±0.2
9.9
+0.4
-0.25
3.3
±0.2
CLAMPING TORQUE:0.216N・m MAX(2.2kg・cm MAX)
RECOMMENDATION TORQUE:0.118N・m〜0.176N・m
(1.2kg・cm〜1.8kg・cm)
2-M2 TAPPED HOLES FOR INSTALLATION.
DEPTH 2.5MAX.1.4MIN.
(Unit:mm)
(±0.4)
CLAMPING TORQUE:0.216N・m MAX(2.2kg・cm MAX)
RECOMMENDATION TORQUE:0.118N・m〜0.176N・m
(1.2kg・cm〜1.8kg・cm)
10
±0.2
82.8
±0.2
27.3
±0.2
11.2
±0.2
3
±0.2
82.8
±0.2
27.3
±0.2
11.2
±0.2
89.45
2.6
126.1
CONVEX:0.7
(NOTE)THIS SIDE VIEW IS FOR BEZEL ONLY.
BEZEL:GENERIC TYPE
(MINIMUM V
ALUE OF
SCREW INSERTING LENGTH)
Fig.2
(MAXIMUM V
ALUE OF
SCREW INSERTING LENGTH)
2.5MAX
1.4MIN
FRAME,MAIN
MOUNTING SCREW
MOUNTING SCREW
FRAME,MAIN
1.4MIN
(MINIMUM VALUE OF
SCREW INSERTING LENGTH)
2MAX
(MAXIMUM VALUE OF
SCREW INSERTING LENGTH)
Fig.1