12-34 CIP Product Code
Range:
Function:
1100 (FC 302) 1110 (FC
301)
*
[0 – 9999] Read only. Displays the CIP
product code.
12-37 COS Inhibit Timer
Range:
Function:
[0–65.535
ms]
Read-only Change-Of-State inhibit timer. If the
option is configured for COS operation, this inhibit
timer can be configured in the Forward Open
message to prevent that continuously changing
PCD data generates extensive network traffic. The
inhibit time is in milliseconds, 0 = disabled.
12-38 COS Filters
Range:
Function:
[[0–9] Filter 0–9
(0000–FFFFhex)]
Change-Of-State PCD filters. Sets up a filter
mask for each word of process data when
operating in COS mode. Single bits in the
PCDs can be filtered in/out.
3.13.5 12-8* Other Ethernet Services
12-80 FTP Server
Option:
Function:
[0]
*
Disable
Disables the built-in FTP server.
[1]
Enable
Enables the built-in FTP server.
12-81 HTTP Server
Option:
Function:
[0]
*
Disable
Disables the built-in HTTP (web) server.
[1]
Enable
Enables the built-in HTTP (web) server.
12-82 SMTP Service
Option:
Function:
[0]
*
Disable
Disables the SMTP (e-mail) service on the option.
[1]
Enable
Enables the SMTP (e-mail) service on the option.
12-89 Transparent Socket Channel Port
Range:
Function:
0
*
[0 – 9999] Configures the TCP port number for the
transparent socket channel. This enables
adjustable frequency drive message to be sent
transparently on Ethernet via TCP. Default value is
4000, 0 means disabled.
3.13.6 12-9* Advanced Ethernet Settings
12-90 Cable Diagnostics
Option:
Function:
Enables/disables advanced cable diagnosis function.
If enabled, the distance to cable errors can be read
out in par. 12-93. The parameter resumes to the
default setting of Disable after the diagnostics have
finished.
[0]
*
Disable
[1]
Enable
NOTE!
The cable diagnostics function will only be issued on ports
where there is no link (see par. 12-10,
Link Status
)
12-91 Auto Cross-Over
Option:
Function:
[0]
Disable
Disables the auto cross-over function.
[1]
*
Enable
Enables the auto cross-over function.
NOTE!
Disabling of the auto cross-over function will require crossed
Ethernet cables for daisy-chaining the options.
12-92 IGMP Snooping
Option:
Function:
This prevents flooding of the Ethernet protocol stack
by only forwarding multicast packets to ports that
are a member of the multicast group
[0]
Disable Disables the IGMP snooping function.
[1]
*
Enable
Enables the IGMP snooping function.
12-93 Cable Error Length
Option:
Function:
If Cable Diagnostics is enabled in par. 12-90,
the built-in switch is enabled via Time
Domain Reflectometry (TDR). This is a
measurement technique which detects
common cabling problems such as open
circuits, short circuits and impedance
mismatches or breaks in transmission cables.
The distance from the option to the error is
displayed in meters [feet] with an accuracy of
+/- 2 m [6.5 ft]. The value 0 means no errors
detected.
[0] Error length
Port 1 (0–200 m
[0–656 ft])
[1] Error length
Port 2 (0–200 m
[0–656 ft])
Parameter Descriptions
FC 300 Programming Guide
3-104
MG.33.MA.22 - VLT
®
is a registered Danfoss trademark
3
3
